Whether you are building your first home in Sarjapur, launching a commercial establishment in Electronic City, or developing a multi-unit residential complex in Whitefield — one thing stands between your completed structure and a functional electricity supply: a new BESCOM service connection.
In 2026, this is no longer a process you can navigate informally. The introduction of mandatory smart metering, updated electrical safety standards, and tighter drawing-approval protocols has made professional involvement at every stage — from initial application to final meter sealing — not just advisable, but necessary for a successful outcome.
This guide covers what you need to know about obtaining a new BESCOM LT (Low Tension) connection in Bangalore — the requirements, the process, and why working with a Licensed Electrical Contractor (LEC) from day one protects both your timeline and your safety.
Who Needs a New BESCOM Connection?
A new service connection (SC) is required whenever electricity needs to be supplied to a premises that currently has no active BESCOM meter. This includes:
- Newly constructed residential buildings, apartments, or villas
- New commercial establishments, offices, and retail spaces
- Agricultural-to-residential plot conversions with new constructions
- Industrial or warehouse units requiring a fresh LT supply
- Properties where the existing connection was permanently disconnected
- Converted properties requiring a separate metered connection
The documentation, sanctioned load, and meter board specifications differ significantly between LT domestic and LT commercial connections. Filing under the wrong category is a common error that leads to rejection and restarts the entire application clock.
Understanding the 2026 Smart Meter Mandate
Perhaps the most significant change affecting new connections in Bengaluru in 2026 is the mandatory smart meter provision. BESCOM has mandated that all new service connections — residential and commercial — be provisioned with Advanced Metering Infrastructure (AMI)-compliant smart meters.
This mandate has direct implications for how your meter board and internal wiring must be designed and installed. Specifically:
Smart Meter Board Specifications
The meter board — the enclosure that houses your incoming supply, energy meter, main switch, and MCBs — must now conform to updated physical and electrical specifications. The dimensions, IP rating, material, and mounting position are all subject to BESCOM field officer approval during site inspection. A meter board built to older standards will fail inspection and require replacement before the meter is sealed.
Communication Infrastructure
Smart meters communicate consumption data back to BESCOM over radio frequency (RF) or power line communication networks. New installations must ensure there are no significant RF obstructions or interference sources near the meter board location.
⚠️ Note for Builders and Developers: If you are handing over individual flats to buyers, each unit's meter board must independently meet smart meter compliance standards. A single non-compliant board in a multi-unit complex can hold up electricity connections for the entire building.
Documents Required for a New BESCOM Connection in 2026
The documentation set for a new BESCOM LT connection has become more comprehensive. Requirements include:
- Completed application on the JVS (Janasnehi Vidyuth Sevegalu) portal
- Proof of ownership — sale deed, Khata certificate, or allotment letter
- Approved building plan from BBMP / Planning Authority
- Occupancy Certificate (OC) or Completion Certificate (CC) — where applicable
- Tax Paid Receipt (latest year)
- Aadhaar Card of the applicant
- Single-line diagram (SLD) and electrical layout drawing — prepared by a licensed professional
- Load calculation statement signed by a Licensed Electrical Contractor
- Earthing test report
- Completion-cum-Test (CCT) Report signed and stamped by an LEC
The Role of the Licensed Electrical Contractor (LEC)
A Licensed Electrical Contractor is not just a vendor — under the Karnataka Electricity (Licensing and Supervision) Rules, they are a legally empowered professional responsible for the safety and compliance of all electrical works at a premises before BESCOM supply is granted.
For a new connection, the LEC's responsibilities include:
- Designing and supervising the installation of the meter board to 2026 standards
- Conducting earthing installation and testing — minimum two earth pits per residential connection
- Preparing the Completion-cum-Test Report (CCT) — a mandatory legal document without which BESCOM will not proceed past site inspection
- Signing and stamping the load calculation and single-line diagram submitted with the application
- Liaising with the BESCOM Section Office for technical query resolution
The Completion-cum-Test Report is a sworn declaration by the LEC that all internal electrical work meets the standards under the Indian Electricity Rules and BESCOM specifications. Only a BESCOM-registered Licensed Electrical Contractor can issue this document. Without it, no new connection application will progress past the "Site Inspection Pending" stage.
Understanding Your Sanctioned Load: Getting It Right the First Time
When you apply for a new connection, you must declare a sanctioned load — the maximum electrical demand (in kilowatts or kilovolt-amperes) that BESCOM agrees to supply to your premises. This figure is used to determine your transformer allocation, service line size, and meter rating.
Getting this number wrong has real consequences:
If You Under-Declare the Load
Your connection will be undersized for your actual needs. Running heavy appliances, EV chargers, or commercial equipment will exceed your sanctioned load — resulting in monthly penalties and potential supply interruption.
If You Over-Declare the Load
BESCOM may require a larger, more expensive service line and transformer allocation. Your meter rating will be higher than necessary, and ongoing fixed charges may be inflated.
At Bright Wire Works, our load assessment is based on a rigorous review of your actual appliance inventory, the building's intended use, and anticipated future requirements — including EV charging infrastructure if applicable.
The New Connection Process: From Application to Meter Sealing
We visit the premises, assess the intended use, and calculate the appropriate sanctioned load. We confirm meter board placement and earthing requirements.
We install the compliant meter board, main switch, earthing pits, and all associated wiring in accordance with 2026 BESCOM and IE Rules standards.
We prepare the single-line diagram, load calculation statement, and earthing test report — all documents that must accompany the JVS portal application.
We file the complete application on the Janasnehi Vidyuth Sevegalu portal with accurate data and all supporting documents attached.
We coordinate and attend the BESCOM site inspection, responding to all technical queries raised by the field officer on-site.
We submit the signed Completion-cum-Test Report and coordinate with BESCOM for the final smart meter installation and sealing at your premises.
Areas We Serve in Bengaluru
Bright Wire Works provides new BESCOM connection services across the full extent of BESCOM's service territory in Bengaluru, with particular depth of experience in:
- Whitefield, Kadugodi, and EPIP Zone
- Electronic City, Hebbagodi, and Bommasandra
- Yelahanka, Devanahalli, and North Bengaluru corridor
- Hebbal, Thanisandra, and Kalyan Nagar
- Sarjapur Road, Marathahalli, and Outer Ring Road belt
- Jayanagar, JP Nagar, and South Bengaluru residential areas
- HSR Layout, Bellandur, and Agara
- Rajajinagar, Malleshwaram, and West Bengaluru
Frequently Asked Questions
Ready to Begin Your New BESCOM Connection?
From meter board installation and earthing to JVS portal filing and final meter sealing — Bright Wire Works manages every step, so your premises is powered on schedule.